Garmin DESCENT MK1 Owner's Manual page 105

Left PPP: The current power phase peak angle for the left leg. Power phase peak is the angle range over which
the rider produces the peak portion of the driving force.
Lengths: The number of pool lengths completed during the current activity.
LL 500m Pace: The average rowing pace per 500 meters for the last lap.
L Lap Dist P Stk: Swimming. The average distance traveled per stroke during the last completed lap.
L Lap Dist P Stk: Paddle sports. The average distance traveled per stroke during the last completed lap.
Location: The current position using the selected position format setting.
Max. Ascent: The maximum rate of ascent in feet per minute or meters per minute since the last reset.
Max. Descent: The maximum rate of descent in meters per minute or feet per minute since the last reset.
Max. Elevation: The highest elevation reached since the last reset.
Max. Lap Power: The top power output for the current lap.
Max. Nautical Speed: The maximum speed in knots for the current activity.
Maximum Speed: The top speed for the current activity.
Max Power: The top power output for the current activity.
Min. Elevation: The lowest elevation reached since the last reset.
Moving Time: The total time moving for the current activity.
Multisport Time: The total time for all sports in a multisport activity, including transitions.
Muscle O2 Sat. %: The estimated muscle oxygen saturation percentage for the current activity.
Nautical Dist: The distance traveled in nautical meters or nautical feet.
Nautical Speed: The current speed in knots.
Next Waypoint: The next point on the route. You must be navigating for this data to appear.
NP: The Normalized Power
Off Course: The distance to the left or right by which you have strayed from the original path of travel. You must
be navigating for this data to appear.
Pace: The current pace.
PCO: The platform center offset. Platform center offset is the location on the pedal platform where force is
applied.
Pedal Smooth.: The measurement of how evenly a rider is applying force to the pedals throughout each pedal
stroke.
Perform. Cond.: The performance condition score is a real-time assessment of your ability to perform.
Power: The current power output in watts.
Power to Weight: The current power measured in watts per kilogram.
Power Zone: The current range of power output (1 to 7) based on your FTP or custom settings.
Rear: The rear bike gear from a gear position sensor.
Repeat On: The timer for the last interval plus the current rest (pool swimming).
Reps: During a strength training activity, the number of repetitions in a workout set.
Rest Timer: The timer for the current rest (pool swimming).
Right PP: The current power phase angle for the right leg. Power phase is the pedal stroke region where
positive power is produced.
Right PPP: The current power phase peak angle for the right leg. Power phase peak is the angle range over
which the rider produces the peak portion of the driving force.
Set Timer: During a strength training activity, the amount of time spent in the current workout set.
Speed: The current rate of travel.
Stopped Time: The total time stopped for the current activity.
Stride Length: The length of your stride from one footfall to the next, measured in meters.
Stroke Rate: Swimming. The number of strokes per minute (spm).
Stroke Rate: Paddle sports. The number of strokes per minute (spm).
Appendix
for the current activity.
™
97