Technical Data - Siemens FN2012-A1 Installation Manual

Supply
Ethernet interfaces
Connectors
Module connections
(optional)
Mechanical data
Ambient conditions
A6V10407862_e_en_--

9 Technical data

Operating voltage
Standby power consumption
Built-in power consumption, supply via
MoNetBus or AUX power
Power consumption via PoE
Sockets
Length of line
External supply input
Fault terminal
● Fault output 'F1', 'F2'
MoNetBus
External Ethernet connections 'P2', 'P3'
Circuits
Ethernet module (electric) VN2001
Ethernet module (MM) VN2002
Ethernet module (SM) VN2003
Dimensions (W x H x D), with cover,
without optional modules
Weight
For indoor use in dry rooms only
Operating temperature
Rel. humidity during operation
Protection category
1
The length is a guide value dependent upon the loss of the cable used, the loss of the
connector types used, and the transmission losses that are present. The
corresponding values must be taken from the respective data sheets.
Technical data
DC 24 V
95 mA @24 V
Max. 380 mA @ 24 V
Max. 185 mA @ 24 V
4x RJ45, 10/100 Mbit/s
● P4, P5 'Local', limited to same
housing but must be min. 2 m
● P2, P3 'Field', limited to same room
but must be min. 2 m, max. 6 m
4-pin plug-in terminal
4-pin plug-in terminal
Dry contact relay (common)
Switching current max. 1 A, resistive
Switching voltage max. DC 30 V
22-pin flat-cable connector
● Additional voltage surge protection
● Increased EMC protection
● Ground fault supervision
● All connections are power limited
● All connections – except local and
MoNet connections – are supervised
RJ45 connection (TP), cable length max.
330 ft/100 m
LC connector, multi-mode fiber optic
● Fiber length 62.5/125°µm:
13123 ft/4 km with an 11 dB loss
● Fiber length 50/125°µm: 6561 ft/2 km
1
with a 7.5 dB loss
LC connector, single-mode fiber optic:
● Fiber length 9/125°µm:
131233 ft/40 km with a 29 dB loss
165 x 121 x 43 mm
560 g/1.2 lbs
120+/-3°F to 32+/-3°F
93+/-2% at a temperature of 90+/-3°F
IP30
9
1
1
29 | 32