Ethernet Switch As A Repeater - Siemens FN2012-A1 Installation Manual

Wiring
4

Ethernet switch as a repeater

4.6 Ethernet switch as a repeater
18 | 32
The Ethernet switch (modular) can also be used as a repeater in the electric Ethernet.
For each repeater, the distance of the electric Ethernet connection increases by
330 ft/100 m. The repeater is supplied with power via PoE from the installed Ethernet
module (electric) VN2001.
The arrows in the figures symbolize the function of the ground fault supervision and the
supply via PoE from the Ethernet module (electric).
The settings for PoE and ground fault supervision are made by plugging jumpers into
slots P0 and P1 on the corresponding Ethernet module (electric).
One repeater
PoE & ground fault
100 m/330"
Switch1
P1 P0
P0 P1
P2 P3 P4 P5
MoNet
MoNet
Ethernet
PMI & Mainboard
Panel
Figure 14: 1x Ethernet switch (modular) as a repeater in the electric Ethernet
Jumper settings on the VN2001 with one repeater:
Switch/repeater
Switch 1
Repeater
Switch 2
Ground fault
Electrical Ethernet
100 m/330"
P1 P0
P0 P1
P2 P3 P4 P5
MoNet
Repeater
Panel
VN2001 in port P1
Not connected
PoE
Ground fault supervision
Switch2
P1 P0
P0 P1
P2 P3 P4 P5
MoNet
MoNet
Ethernet
PMI & Mainboard
VN2001 in port P0
PoE
Neutral position
Not connected
A6V10407862_e_en_--