Sip Settings - ATCOM AT820 Quick Start Manual

AT820 AT820 AT820 AT820 Quick Quick Quick Quick Start Start Start Start Guide Guide Guide Guide
model and Admin model. All the parameters can be visible and changed in Admin mode
while part of them can be visible in User mode.
� Enable Web Server: enable or disable web access. If choose "no", you can not
access AT820 webpage.
� Admin password: set admin webpage access password.(username:admin)
� User password: set user webpage access password.(username:user)
� � � � SIP SIP Settings Settings

SIP Settings

SIP Settings
Enter "Account" -> "Account1" page.
Enable: whether enable this sip register.
�
� Display Name: This name will display on your screen. It will show the User ID
instead if leave display name as blank.
� User ID: Username of sip account.
� Authenticate ID: normally is the same with User ID, can also leave it as blank if
there is no special requirement form your sip server.
� Password: Password of sip account.
� Sip Server: SIP server address , support both IP address and domain name.
� Sip Port: SIP server port , default is 5060.
� Use Outbound Proxy: Whether to use outbound proxy.
� Outbound Proxy Server：Normally the Proxy server is the same as SIP server. If
ATCOM TECHNOLOGY CO., LIMITED
All manuals and user guides at all-guides.com