Configure At820 To Make Voip Calls; Network; Set Password - ATCOM AT820 Quick Start Manual

AT820 AT820 AT820 AT820 Quick Quick Quick Quick Start Start Start Start Guide Guide Guide Guide
user webpage.
Click "admin" which is on the right corner to enter administrator webpage.
2 2 2 2 、 、 、 、 Configure
Configure Configure AT820 Configure AT820 AT820 to AT820
� � � �

Network

Network Network Network
Enter "Network" -> "Basic" page.
There are 3 ways to connect to the internet DHCP, Static and PPPoE, please choose one
according to your own situation.
� Network mode: you can choose DHCP, Static and PPPoE
� DHCP: AT820 default to use DHCP to obtain dynamic IP.
� Static: If you want to set your ip as static, you should fill ip, netmask, gateway and
DNS information.
PPPoE: If connect AT820 to modem, you should fill ADSL account and the
�
password which assigned by your network service provider.
� � � � Set password
Set Set

Set password

password password
Enter "Network" -> "Advance" page.
There are 2 models to set the authority of web accessing and command line: User
ATCOM TECHNOLOGY CO., LIMITED
All manuals and user guides at all-guides.com
to make to to make make VoIP make VoIP calls VoIP VoIP calls calls calls