Explore Software - Actel Silicon Explorer II Quick Start Manual

Explore
Software
Table 4. Matching Probe Pins to Device Pins (Continued)
Probe
PRA PRA
PRB PRB
ISP Kit
The ISP kit includes a programming ribbon cable and a plug-in
connector. The programming cable and ProASIC connector provide all
the necessary connections to program a ProASIC device on the system
board. Use the plug-in connector to properly place the FPGA's power
supply pins for normal operation.
The Explore software consists of two components, the Command
module and the Analyze module. The Command module of the
Explore software lists all the observable nets in the FPGA. Use the
Command module to verify that you programmed the correct design in
the FPGA. The Analyze module is an 18-channel logic analyzer that
ACT2, 42MX,
Act1, 40MX
PRA
PRB
Connecting Silicon Explorer II
3200DX
PRA
PRB
SX
7