Spare Parts; Operation; Technical Data - Hans Grohe Allegra 14800 Series Manual

Assembly
1. Flush through the supply pipes.
2. Place the mixer including the sealing washer in
position on the sink.
3. Slip the plastic washer, the slide washer, the
metall washer and collar nut over the hose
and threaded base and tighten the collar nut
by hand. If there is not enough space, please
use only the slide washer and the metall
without the plastic washer.
4. Tighten screws.
5. Connect the connecting hose to the angle
valves; cold right - hot left.
6. Connect a dish washer or a washing machine to
the thread DN20 (¾ ").
Large differences in pressure between the hot and
cold water supply should be balanced.

Operation

The mixer is actuated by lifting the lever head.
Swivel to the left = hot water,
swivel to the right = cold water.
Turn to left = stop valve open,
turn to right = stop valve closed.

Technical Data

Operating pressure:
Recommended operating pressure:
Test pressure:
Hot water temperature:
Recommended hot water temperature: 65° C
Rate of flow by 3 bars:
hot water limiter:
Hansgrohe single lever mixers can be used together
with hydraulically and thermically controlled
continuous flow heaters if the flow pressure is at
least 1.5 bars.
English

Spare parts

1
1.1 screw cover basin
1.2 hollow set screw M6x10 DIN 916 96029000
2
3
4
5
6
7
8
9
10
11
12
XXX = Colors
000 chrome plated
090 chrome plated/gold plated
440 brown
450 white
610 black
max. 10 bars
1 - 5 bars
16 bars
max. 80° C
11 l/min
order separatly
handle
flange
nut
cartridge cpl. basin
service set
seals (5)
mixer ball
mousseur cpl. (10)
mousseur cpl. gold plated
ELASTOP stop unit
washer
fixation cpl.
connection hose for 14800
connection hose for 14805
fixation extension 35 mm
14891X X X
94186000
95046X X X
94106000
14095000
13952000
13962000
13964000
13085000
94980990
94849000
94850000
13961000
95050000
14099000
13898000