Page 1
JC User Manual 1. Introduction This manual contains installation and operation instructions for the JC crane scale. Please read the manual completely before installation and operation. 2. Precautions Before using, please check and make sure every part is in good condition. Provided there is any broken, please inform your dealer ...
Page 2
4. Specifications & Features 4-1 Specifications Model JC-600 JC-1000 JC-2000 JC-3000 JC-5000 JC-10000 Capacity(kg) 1000 2000 3000 5000 10000 Division 1 (kg) Division 2 (kg) 5 digits, 30mm character height, red backlit LED display Display 100% Capacity Zero Range ≤10s...
Page 3
seconds it will turn back to zero and ready for operation Note: It is recommended to allow scale 3-5min of warm-up time before starting weighing operation. 6-2 Zero Press ZERO to zero the display 6-3 Weighing Begin with no load on the scale, the display reading zero. Place item(s) to be weighted on the scale.
Page 4
6. Press HOLD or SWITCH to shift the zero modes. 0=zero function is allowed when not stable 1=zero function is not allowed when not stable 7. Press ZERO to move to saving setting, while “ ” is displayed on the screen 8.