Advertisement
Available languages
Available languages
Installation
1. Remove the existing top convection baffle supplied
with the heater and replace it with the bridging
baffle supplied with this kit using the same screws.
2. Place the backing plate over the engine and secure it
to the engine frame with two screws on each side.
2
3. Place the heat exchanger cover over the heat
exchanger. Note its shape and orientation.
4. Place the access panel horizontally
under the screen and insert the pins
on each side of the frame through
the slots in the panel. Rotate the
panel downward
.
Access panel
5. Hook the Front Assembly to the four tabs inside
the backing plate.
Front
assembly
—rear view
Front assembly
—rear view
Rear view
Advertisement
