Table of Contents
Advertisement
Fig.59
Reassembly
12
13
11
10
Fig.60
1
6.6
Filling the system
7740321 - v04 - 03122019
10. Put the front insulation cover back in place, ensuring that the
11. Replace the front cover.
14
12. Refit the top cover.
13. Lock the cover in place with the screw and the washer provided in the
x2
14. Lock the cover in place with the two screws provided in the
MW-4000160-2
6.5.5
During installation, leave enough cable length to allow removal of the
control panel for maintenance.
1. Connect the control panel display.
2. Clip the display fascia onto the control panel support.
2
2
MW-4000161-3
Once the hydraulic and electrical connections have been made:
harnesses are fed correctly through the openings provided.
documentation bag.
documentation bag.
Important
Be sure to correctly raise the front cover so that it makes contact
with the cover to guarantee water tightness.
Connecting the control panel display
6 Installation
SPC Split
57
Advertisement
Table of Contents
