Installing The Outdoor Unit - Baxi SPC SPLIT Installation And Service Manual

6 Installation
Fig.30
4
7
Fig.31 Installation on the ground
1
3
42 SPC Split
4. Drill holes (diameter 6 mm) in the positions marked.
5. Insert the dowels in the drill holes.
6. Use 2 screws to mount the support box, routing the cable through the
hole provided for this purpose.
7. Use 2 screws to mount the control panel, routing the cable through the
hole provided for this purpose.
6
MW-4000126-2
6.2.3
Installation on the ground
Use the floor support kit available as an option: package EH112.
Install the appliance on a solid, stable structure able to bear its weight.
Install the appliance a minimum of 80 mm above the ground.
1 Concrete base frame
2 Condensates run-off
3 Run-off channel with a pebble bed
8 0
2
MW-4000127-1

Installing the outdoor unit

7740321 - v04 - 03122019