Setting The Station Id - Brother MFC-8440 User Manual

Setting the Station ID

You should store your name or company name and fax number and
telephone number to be printed on all fax pages that you send.
It is important that you enter the fax and telephone numbers in the
internationally standardised format, i.e. in accordance with the
following strict sequence:
■
The "+" (plus) character (by pressing
■
Your Country Code (e.g. "61" for Australia, "64" for New Zealand)
■
Your local area code minus any leading "0"
■
A space
■
Your number on the local exchange, using spaces to aid
readability as appropriate.
As an example, if the machine is installed in the United Kingdom and
the same line is to be used for both fax and voice calls, and your
national telephone number is 0161-444 5555, then you must set the
fax and telephone number parts of your station ID as: +44 161-444
5555.
1
Menu
Press
2
Enter your fax number (up to 20
digits).
Set
Press .
3
Enter your telephone number (up to 20 digits).
Set
Press .
(If your telephone number and fax number are the same, enter
the same number again).
■
The telephone number you enter is only used for Cover
Page features. (See Composing the electronic Cover Page
on page 6-14.)
■
You cannot enter a hyphen.
0 3
, , .
key)
03.Station ID
Fax:
Enter & Set Key
GETTING STARTED 4 - 2