Press the Menu numbers.
(ex. Press 1, 1 for Mode Timer)
If you installed optional LAN board (NC-9100h), the LCD shows
the following LAN menu.
Main Menu
Submenu
6.LAN
1.Setup
TCP/IP
(option)
OR
—
—
to select
Menu
Selections
1.BOOT Method
2.IP Address
3.Subnet Mask
4.Gateway
5.Host Name
6.WINS Config
7.WINS
Server
The factory settings are shown in Bold with .
to select
Options
Descriptions
You can choose the
Auto
BOOT method that
Static
best suits you needs.
RARP
BOOTP
DHCP
[000-255].
Enter the IP address.
[000-255].
[000-255].
[000-255]
[000-255].
Enter the Subnet
mask.
[000-255].
[000-255].
[000-255]
[000-255].
Enter the Gateway
address.
[000-255].
[000-255].
[000-255]
Enter the Host name.
BRN_XXXXXX
You can choose the
Auto
WINS configuration
Static
mode.
Specifies the IP
Primary
address of the
Secondary
primary or secondary
server.
ON-SCREEN PROGRAMMING 3 - 13
to
to accept
exit
Page
See
Network
User's
Guide
on the
CD-ROM