Changing One-Touch And Speed-Dial Numbers - Brother MFC-8440 User Manual

Changing One-Touch and Speed-Dial numbers

If you try to store a One-Touch or Speed-Dial number where a
number has already been stored, the LCD will show the name that
has been stored there (or number) and will ask you to do one of the
following:
1
1
Press to change the stored
number.
—OR—
2
Press to exit without making a
change.
2
Enter a new number.
Set
Press .
■
To erase the whole number or whole name, press
Clear/Back
To erase one digit or letter, use
cursor under it, and then press
■
If you want to insert characters, use
cursor where you want to insert them, and then type.
3
Follow the directions beginning at Step 5 in Storing One-Touch
Dial numbers and Storing Speed-Dial numbers. (See Storing
One-Touch Dial numbers on page 7-1 and Storing Speed-Dial
numbers on page 7-3.)
7 - 4 AUTO DIAL NUMBERS AND DIALLING OPTIONS
repeatedly until all digits or letters are deleted.
23.Set Quick-Dial
*005:MIKE
▲
1.Change
▼
2.Exit
▲▼
Select
or to position the
Clear/Back
.
or to position the
& Set