Load Document; Using The Automatic Document Feeder (Adf) - Brother MFC-7420 User Manual

Chapter 1

Load document

You can send a fax, make copies, and scan
from the ADF (automatic document feeder)
and from the scanner glass.
Using the automatic
document feeder (ADF)
The ADF can hold up to 35 pages and feeds
each sheet individually. Use standard 80 gsm
paper and always fan the pages before
putting them in the ADF.
CAUTION
■
DO NOT use paper that is curled,
wrinkled, folded, ripped, stapled,
paper-clipped, pasted or taped.
■
DO NOT use cardboard, newspaper or
fabric.
■
Make sure documents written with ink are
completely dry.
■
Documents to be faxed must be from
147.3 to 215.9 mm wide and 147.3 to
356 mm long.
1
Fan the pages well. Make sure you put
the documents face up, top edge first
in the ADF until you feel them touch the
feed roller.
1 - 7
2
Adjust the paper guides to fit the width of
your documents.
3
Unfold the ADF document output
support flap.
CAUTION
■
DO NOT pull on the document while it
is feeding.
■
Thick documents left on the scanner
glass may cause the ADF to jam.