Setting Your Station Id - Brother MFC-3360C Quick Setup Manual

11

Setting your station ID

You should store your name and fax number to be
printed on all fax pages that you send.
1
Press Menu, 0, 3.
2
Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
Fax:_
3
Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Name:_
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the same
key as the last character, press
cursor to the right.
• If you entered a letter incorrectly and want to
change it, press or
under the incorrect character, press Clear/Back.
Press One time Two
key times
2 A
3 D
4 G
5 J
6 M
7 P
8 T
9 W
4
Press Stop/Exit.
Note
If you want to repeat input, press Stop/Exit to start
from step 1.
For details, see Entering Text in Appendix C
of the User's Guide.
to move the
to move the cursor
Three Four
times times
B C 2
E F 3
H I 4
K L 5
N O 6
Q R S
U V 8
X Y Z
Setting Up the Machine
Note
(USA only)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a
computer or electronic device to send any
message via a telephone fax machine unless such
messages clearly contain, in a margin at the top or
bottom of each transmitted page, or on the first
page of the transmission, the date and time it is
sent and an identification of the business or other
entity or other individual sending the message and
the telephone number of the sending machines or
such business, other entity or individual.
To program this information into your machine,
see Setting the date and time on page 10 and
Setting your station ID on page 11.
11