Table of Contents
Advertisement
4. Design the IoT Campaign according to Figure 48, making sure to click on each module and set the
appropriate fields to the correct Organization, Device, etc. Click on "Start Campaign" as shown.
Figure 48
5. Repeat steps 2 – 4 above to create another IoT Campaign named Disarm System with
description Disable Alarm. Use Figure 49 as reference for the logic. Start the Campaign and
return to the "IoT Campaigns" page.
Figure 49
6. The two campaigns that were just created should be listed as shown in Figure 50. They should
show Active in the "Status" column.
© OptConnect Management, LLC 2020. All rights reserved. Revision 1.0
68
Advertisement
Table of Contents
