OptConnect ema:Play User Manual page 45

Console debug input and output is provided through the use of ema:Play's S2USB port (J10). This will help
the user understand how the project is executing in real time and provides verbose debug messaging as
per the enabled console outputs. See "function specific console debug control" in file emaPlay_config.h .
The COM port settings for the console debug interface are 115200,8,N,1. The COM port will enumerate
with the computer as an Enhanced COM Port (COMxxx):
Pressing '?' in the console will list the currently active console Cmds as shown:
Current console Cmd descriptions:
'd' = ema:Play and ema status data. This cmd will list the status of all relevant data to the project:
Example:
's' = Start/Stop demo. This cmd will start and stop (graceful ema shutdown) the demo project.
© OptConnect Management, LLC 2020. All rights reserved. Revision 1.0 45