OptConnect ema:Play User Manual page 50

The console output shown above is typical to what would be seen when running this sample project for a
short period of time. Each console line starts with a timestamp(mS) since the code execution started.
The first message outputted is the welcome message that includes the "Project Name" FW Version: Mo
Day Year, followed by an input tip; '?' for menu. Reference the below table for line by line description.
Timestamp(mS) Description
761 ema:Play has detected that power for ema is available.
861 The user is instructed to hold SW7 to start the demo.
11202 After holding SW7, ema:Play is applying power to ema and waiting for the
appropriate URC.
14211 URC detected, ema:Play has set its Board ID via ema to be reported to Summit.
14211 ema:Play detected ema is powered on, and is now powering on the cellular
module and waiting for the appropriate URCs.
29858 URCs detected. Cellular module is now powered on and ready.
29858 ema:Play is now checking the carrier network status for registration.
41708 ema has been registered on the AT&T network and obtained adequate signal.
41708 ema:Play is now checking for an active data connection.
41754 No data session active, ema:Play is activating the data session.
41897 The data session is now active.
41915 ema:Play is starting the Leaf agent.
41954 The Leaf agent is ready.
© OptConnect Management, LLC 2020. All rights reserved. Revision 1.0 50