OptConnect ema:Play User Manual page 21

Figure 4
The installation will take several minutes to complete.
2. Obtain the latest GettingStartedWithemaVx.x.zip firmware package: Go to
http://optconnect.com/emaPlay , or reach out to an OptConnect representative to obtain the
file. Reference section 1.2 for more information.
3. Launch Atmel Studio 7: Once the software is launched the landing page should look similar to
Figure 5.
Figure 5.
4. Open the project: Open the GettingStartedWithemaVx.x sample project by clicking on the "Open
Project" link or selecting "File", then "Project/Solution" and navigating to the location of the
GettingStartedWithema.atsln file that was obtained in step 2. Once the project has been opened,
the screen should look similar to Figure 6.
© OptConnect Management, LLC 2020. All rights reserved. Revision 1.0 21