Table of Contents
Advertisement
Figure 10
7. Investigate the main.c source file: In the "Solution Explorer" under the folder
"GettingStartedWithema", locate the main.c file and open it. It can be observed that the "User
Label" references are used in the API calls in the int main(void) function. This is a simple
demonstration of the correlation between the Atmel | Start tool and the source code references.
Reference Figure 11.
Figure 11
8. Build the project: Click "Build", then "Build Solution", or simply press F7 to compile the source
code and build the project. The "Output" window can be observed for any errors. There should
not be any errors if using the provided project. Reference Figure 12.
© OptConnect Management, LLC 2020. All rights reserved. Revision 1.0
24
Advertisement
Table of Contents
