Table of Contents
Advertisement
2. On the right side of the screen click the "Add New" button to create a new IoT Campaign. Enter
Intruder – Flash Light Detected in the Name Field and Alarm Trigger in the Description Field
and click "Add" as shown in Figure 46.
Figure 46
3. The IoT Campaign canvas page will load and should look similar to Figure 47. The canvas is where
the logic for the Intruder – Flash Light Detected IoT Campaign can be designed. The left side of
the screen includes the modules that can be dragged onto the canvas and interconnected with
other modules.
Figure 47
© OptConnect Management, LLC 2020. All rights reserved. Revision 1.0
67
Advertisement
Table of Contents
