Canon MF832Cdw Important Safety Instructions Manual page 2

• Do not touch the machine during a thunderstorm.
En
• Do not plug in or unplug the power plug with wet
hands.
Fr
• During holidays or other times when the machine
will not be used for long periods, turn the machine
De
off and unplug it from the power supply.
IMPORTANT
It
• Install this machine near the power outlet and leave
Es
sufficient space around the power plug so that it can
be quickly unplugged in an emergency.
• Always ensure that the power plug is unplugged
Ca
from the power outlet before starting work.
• Do not connect the power cord to an uninterruptible
Eu
power supply. Doing so may result in a malfunction
or fault if a power failure occurs.
Pt
• Do not connect the power cord to the auxiliary
power outlet on a computer.
• We recommend using a power outlet wired via a
El
household earth-leakage circuit breaker.
• Electrical noise may cause this machine to
Da
malfunction or lose data.
• When reconnecting the power cord after
Nl
disconnecting it, wait at least 5 seconds before
reconnection.
No • A voltage drop that exceeds the permitted range
may result in a malfunction or loss of data in the
machine and any connected computers.
Sv
• For information on your power supply, contact your
power supplier or your local electrical appliances store.
Fi
Handling
Ru
WARNING
Uk
Observe the following
Lv
Improper handling may lead to a fire, electric shock or
burns.
• If the machine makes an unusual noise, emits an
Lt
unusual smell, emits smoke or excessive heat, or if
any parts are damaged, immediately unplug the
Et
machine from the power outlet and contact an
authorized Canon dealer or service provider.
Pl
• Do not disassemble or modify this machine.
• Place the machine such that the power cord and
other cables and the gears and electrical parts inside
Cs
the machine are well out of the reach of children.
• Do not place jewelry or other metal objects or
Sk
containers filled with liquid on the machine.
• Do not use flammable sprays near this machine.
Sl
• When moving this machine, always turn the machine
off at the power switch, unplug the machine from
Hr
the power outlet and then disconnect the power
cord and interface cables.
• When connecting or disconnecting a USB cable
Hu
while the machine is still plugged into a power
outlet, do not touch the metal part of the connector.
Ro
• Do not connect unapproved products to ports on
this machine (power outlet, connector ports, etc.).
Bg
• When installing or removing optional products,
always turn this machine off at the power switch,
unplug the machine from the power outlet and then
Tr
disconnect the power cord and interface cables.
Ar
Cleaning and maintaining this machine
Improper cleaning may result in machine malfunctions,
fire, electric shock or static electricity.
Fa
• You should clean this machine regularly.
• Before cleaning, always turn the machine off and
unplug it from the power outlet.
• Unplug the power plug periodically and wipe the
machine with a dry cloth to remove dust and grime.
• Clean the machine using a cloth moistened with
water and then thoroughly wrung out. Do not use
alcohol, benzene, paint thinners or other flammable
substances and do not use tissue paper or paper
towels.
• Regularly check the machine for overheating, rusting,
dents, scratches and cracks.
Users of cardiac pacemakers
This machine and its toner cartridges emit low levels of
magnetism and ultrasonic waves. If you use a cardiac
pacemaker and experience any abnormalities, move
away from the machine and consult your physician.
CAUTION
Take care not to drop heavy objects, on the platen
glass
Doing so may damage the platen glass and result in
injury.
Do not attempt to carry the machine with the paper
drawers or optional products (paper feeder, cassette
pedestal) installed
Doing so risks parts being dropped and causing injury.
Observe the following
Failure to do so may result in injury, faults or paper jams.
• Do not place heavy objects on this machine.
• Take care not to trap your hands when using parts
that open and close.
• To avoid your hands or fingers being trapped, do not
touch the paper eject rollers.
• Take care to avoid paper cuts when replenishing the
paper or clearing paper jams.
• Do not subject the machine to strong impacts or
shaking.
• Do not use undue force when opening and closing
doors, covers or drawers, etc. on the machine.
• Do not turn this machine off while it is printing.
• Do not open and close any covers or remove or add
paper while the machine is running.
Move or re-install the machine as instructed in the
User's Guide
When relocating or re-installing a previously installed
machine, do so in accordance with the instructions in
the User's Guide.
Using the feeders correctly
Improper use may result in injury.
• When making copies of items such as thick books on
the platen glass, do not press down hard enough to
damage the feeder.
2
• Close the feeder slowly.
• Do not slide your hand or fingers fully into the feeder.
Do not put your hand into the machine while the
paper drawers are removed (only for machines with
paper drawers installed)
Doing so may result in injury.
Do not touch high-temperature or high-voltage
components
Doing so may result in burns or other injury.
• Do not touch parts of the machine other than those
specified in the manual.
• Immediately after use, the inside of the machine and
the paper eject slots are hot and should not be
touched.
• Printed paper may become hot during continuous
printing and should be handled with care.
Standard / regulation
Product name
In some sales regions, this product may be registered
under the names in parentheses ( ) below in accordance
with local safety regulations.
MF832Cdw (F176702)
Wireless LAN Regulatory Information
Regulatory information for users in Jordan
MF832Cdw includes approved Wireless LAN Module
(Model name: K30365).
Contains Wireless LAN Module approved by TRC/
SS/2014/407
EMC requirements of EC Directives
This equipment conforms with the essential EMC
requirements of the relevant EC Directives. We hereby
declare that this product conforms with the EMC
requirements of the EC Directives at a nominal mains
input 230 V at 50 Hz, although the rated input of the
product is 220 to 240 V at 50/60 Hz. Shielded cables
must be used to comply with the technical EMC
requirements of the EC Directives.
EU WEEE and Battery Directives
WEEE and Battery Directives information is available in the
latest User's Guide (HTML manual), which can be viewed
on the Canon website (https://oip.manual.canon/).