Direct and Mix Outputs
⑤ Assign the Direct Outputs (GUI Only)
Assign the Direct Output for each channel from the Output tab of the GUI.
◦
Pre-EQ: After the Input Gain
◦
Post-EQ: After the EQ blocks
◦
Post-Fader: After the channel fader
◦
IntelliMix: After the IntelliMix gating decision
◦
IntelliMix NOMA: After IntelliMix gating and NOMA decisions
⑥ Set Mix Output Level (GUI Only)
Set the Output level according to the input of the connecting equipment:
◦
Line (-0) (default): No attenuation to the output level.
◦
Aux (-20): The signal is attenuated 20 dB to avoid clipping a line input.
◦
Mic (-46): The signal is attenuated 46 dB to match a microphone input.
⑦ Set the Limiter
Output Tab
Shure Incorporated
22/59