Shure Digital IntelliMix SCM820 Manual page 48

Device
Device Name
Device Serial Number
Firmware version
Meter Type
Headphone Mode
Enable Software Meters
No Lights Mode
Flash LEDs
Device names can be customized with up to 31 any characters in length except '=','.' or '@'.
Unique identification of the mixer. Use the number to register the unit at shure.com.
Displays the firmware version of the device.
Selects the information displayed on the channel input meters on the Input tab:
• VU+Peak (default): Peaks display as a hash bar; average signal levels are displayed as
a solid bar.
• VU: Displays average audio signals.
• Peak: Displays peak audio signals with a peak hold displayed as a hash bar.
Routes audio to the headphone output from one of two stages in the signal path:
• Pre Fader (default): Post EQ and pre-volume knob/fader.
• Post-Fader: Post EQ and post-volume knob/fader. This is post-limiter for the mix adjust-
ments.
When selected, this turns on all metering in the control application. Enabling meters increas-
es network traffic. (This does not affect the hardware metering.)
Turns off all visual indicators on the mixer (except the Power LED on the front panel).
When clicked, this commands the mixer's LEDs to flash for easy identification.
Shure Incorporated
48/59