Omron CJ Series Operation Manual page 38

2
Right-click any open space in the Unit Editor and select Production Information.
The Production Information Dialog Box is displayed.
In this example, "Ver.1.0" is displayed next to the unit model.
The following items are displayed.
Unit model
Unit version
Lot number
 EtherCAT Slaves
1
Double-click EtherCAT under Configurations and Setup in the Multiview Explorer. Or, right-
click EtherCAT under Configurations and Setup and select Edit from the menu.
The EtherCAT Configuration Tab Page is displayed for the Controller Configurations and Setup
layer.
2
Right-click the master in the EtherCAT Configurations Editing Pane and select Display Produc-
tion Information.
The Production Information Dialog Box is displayed.
The following items are displayed.
Node address
Type information*
Serial number
* If the model number cannot be determined (such as when there is no ESI file), the vendor ID, product
code, and revision number are displayed.
34
Simple Display
CPU Unit
CJ-series PROFIBUS Master Unit Operation Manual for NJ-series CPU Unit (W509)
Detailed Display
CJ-series Units
Unit model
Unit version
Lot number
Rack number, slot number, and unit number