Iwatsu SY-8218 Instruction Manual page 7

Read the following safety information.
● Do not modify this product.
Modification of it could result in an electric shock, fire, or failure.
In this product, the open security seal (Refer to the drawing for Ⅹ page and "Repair and
return of repaired product") is pasted to main unit and measurement POD. It is not possible
to respond to the repair when the open security seal is peeled off, and remodeled.
● Do not use this product when being failed.
If not, an electric shock or fire may occur. For a failure, contact Iwatsu office or our sales
distributors for repair.
● Do not put any metallic material or inflammable
object through the ventilation port.
If any foreign object is put through the ventilation port, an electric shock, fire, or failure may
occur. If any foreign object enters this product, set the power switch on the front to
STANDBY, turn off the main switch on the rear, and remove the power plug from the
receptacle, and then contact Iwatsu office or our sales distributors for repair.
● Do not put any object near to the exhaust port or
ventilation port of this product.
If not, heat accumulates inside this product, causing an electric shock, fire, or failure.
● Before inserting the power plug into the receptacle,
confirm no dust attached to it. In addition, remove
the power plug and adapter from the receptacle and
inspect/clean them once a half year or a year.
Dust may cause an electric shock, fire, or failure.
Warnings
V
Read the next page.
(Conti nued)