System Area; Measurement Area - Iwatsu SY-8218 Instruction Manual

[CLEAR key]
 Popup Edit Box allowing character input
 Popup Edit Box allowing only number input
[CANCEL/ UNDO key]
 Edit Box selection
 Popup Edit Box input : It cancels an entry and closes Popup Edit Box.
 List Box selection
 Popup List display

When a Reference measurement value appears, UNDO does not function.
■

3.3.2 SYSTEM area

[SAVE/RECALL key]
 Selection of SAVE/RECALL allows Popup List to appear.
 If pressed when Popup List is displayed, Popup List is closed.
[UTILITIES key]
 It displays Utilities screen.
 If pressed when Utilities screen is displayed, the screen is closed.

The screen can also be closed by pressing EXIT key.
■

3.3.3 MEASUREMENT area

[START key]
 It starts measurement.
[STOP key]
 If pressed during measurement, the measurement is forcibly stopped.
[MODE key]
 It displays Popup List to select a measurement mode.
 If pressed when Popup List appears, the list is closed.
[CONFIG key]
 It displays Configuration screen.
 If pressed when Configuration screen appears, the screen is closed.

The screen can also be closed by pressing EXIT key.
[STORAGE key]
 It memorizes Current waveform displayed in yellow after measurement as Ref. (Reference) waveform.

If there has already been Reference waveform, it is overwritten.
: It clears characters in the box.
: It sets a number in the box to 0.
: Pressing it allows items in the box to toggle between old settings/ current settings.
: Pressing it allows items in the box to toggle between old settings/ current settings.
: It cancels a selected item and closes Popup List.
15
B-H ANALYZER SY-8218 / SY-8219