■
6.5 Measurement
● Measurement is made.
① Press
to start measurement and to allow the message "Measuring !"to blink on the screen.
② When the measurement finishes normally, the message "Measuring !"disappears and the measurement result is displayed (see Fig.6-4).
➂ To forcibly stop measurement after starting the measurement, press
result may show *.
Since the time of one cycle becomes long as the measurement frequency becomes low, the time after pressing
measurement stops actually becomes long.
. If no measurement is made at that time, the measurement
Fig.6-4 Measurement result
35
B-H ANALYZER SY-8218 / SY-8219
until the