Scaling Up/Down Of Graph - Iwatsu SY-8218 Instruction Manual

■

6.8 Scaling up/down of graph

● B-H graph is scaled.
① Move the Cross cursor to the position to be scaled when displaying Cross cursor
② When B scale is to be scaled, move the edition cursor to the B scale List Box; when H scale is to be scaled, to the H scale List Box. And then
press .
➂ When Popup List opens, move the edition cursor to the scale to be set and press
If a value larger than a current setting is selected, the displayed graph is scaled down, and if a smaller value is selected, the displayed graph
is scaled up (see Fig.6-11).
④ Scales to be set are shown in Table 6-5. Selection of Reset allows the displayed graph to return the original scale.

6-6: If Cross cursor is not displayed, the graph is scaled up/ down using the origin of the graph as a center.
Ｂ scale
Items Unit
H scale [A/m]/div
B scale [mT]/div
Center of scaling up/down
Ｈ scale
Fig.6-10 Setting of scaling up/ down by Cross cursor
Table 6-5 Selectable scales
Reset, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000, 2000, 5000, 10000
Reset, 0.01, 0.02, 0.05, 0.1, 0.2, 0.5, 1, 2, 5, 10, 20, 50, 100, 200, 500, 1000
*6-6 .(see Fig.6-10).
to determine the scale.
Selectable scales
41
B-H ANALYZER SY-8218 / SY-8219