Table of Contents
Advertisement
⑦ Press
or rotate
to generate the screen hardcopy with the file name being set (SAMPLE2.jpg) on the route and to close Save as screen.
Do not remove USB memory from the USB port during Save operation. A file cannot be generated normally.
● If output is made with a new name added in the existing folder
Here, how to store F:¥Meas_Data¥SAMPLE3.jpg is explained.
⑧ In the status shown in Fig.6-17, move the edition cursor
to the file display area (see Fig.6-20).
➈ Press
to select the route as an output destination.
⑩ Press
to Meas_Data folder (see Fig.6-21).
⑪ Press
to display the folders and the files in
Meas_Data folder (see Fig.6-22).
⑫ Press
to move the edition cursor to the file
display area (see Fig.6-23).
⑬ Press
to move the edition cursor to File Name and
press
to open Popup Edit Box to enter the file name.
If the same operation as ⑥ to ⑦ is made, the screen
hardcopy with the file name being set (SAMPLE3.jpg) is
generated in the specified folder and Save as screen is closed
(see Fig.6-24).
to move the edition cursor to Save button (see Fig6-19), and press
to move the edition cursor
Fig.6-20 Save As screen
Fig.6-21 Save As screen
Fig.6-22 Save As screen
47
B-H ANALYZER SY-8218 / SY-8219
Advertisement
Table of Contents
