Table of Contents
Advertisement
Quick Links
General
Infilex™ BC Model WY5610W0010 is a multipurpose
controller designed to control building equipment, such as
AHU.
Infilex BC enables to control the temperature and humidity,
as well as building equipment operations.
Infilex BC manages Infilex VC and allows you to control and
monitors individual VAV units (ON/OFF, failure monitoring,
measuring, and setting) from client PC of our BMS. Infilex
VC being combined with Infilex BC performs load reset
control of supply air temperature, fan speed control,
interlocking operation of VAV units.
Infilex BC control unit is used with Infilex BC I/O control unit.
Infilex BC control unit conforms to all the applicable
standards of CE Marking (Class A).
AHU: Air handling unit
BMS: Building management system
VAV: Variable air volume
System Configuration
Infilex™ BC integrated into BMS: savic-net™ FX*
2
MIS*
SMS
DSS
BMS: Building Management System
DSS: Data Storage Server
MIS: Management Integration Server
SMS: System Management Server
Notes:
*1 Fig. 1 shows an example of Infilex BC integrated into savic-net FX BMS. Ask our salesperson for applicable BMS.
*2 MIS may be used instead of SMS and DSS for your system. Note that MIS cannot be mixed with SMS or DSS in the same system.
Figure 1. System configuration example: Infilex BC integrated into savic-net FX BMS
Infilex™ BC
Multipurpose Controller
Control Unit
1
Client PC
Infilex™ BC
Infilex™ BC
I/O control unit
control unit
Infilex BC
Infilex™ BC
I/O modules
I/O control unit
Expansion bus
®
BACnet
I/O modules
router
BACnet
1
Specifications/Instructions
®
BACnet
router
Infilex™ VC
for
Third-party
®
BACnet
MS/TP
BACnet
®
®
MS/TP
BACnet
AB-7245
®
BACnet
IP
®
device
MS/TP
Advertisement
Table of Contents
Related Manuals for Azbil Infilex BC WY5610W0010
Summary of Contents for Azbil Infilex BC WY5610W0010
- Page 1 AB-7245 Specifications/Instructions Infilex™ BC Multipurpose Controller Control Unit General Infilex™ BC Model WY5610W0010 is a multipurpose controller designed to control building equipment, such as AHU. Infilex BC enables to control the temperature and humidity, as well as building equipment operations. Infilex BC manages Infilex VC and allows you to control and monitors individual VAV units (ON/OFF, failure monitoring, measuring, and setting) from client PC of our BMS.
-
Page 2: Safety Instructions
Azbil Corporation will not bear any responsibility for the results produced by the operators. Warnings and Cautions ... - Page 3 AB-7245 CAUTION (2/2) For wiring, strip each wire insulation as specified in this manual. If the strip length is longer than the specified, the stripped part of the wires will be exposed, causing electric shock or short circuit between adjacent terminals. If it is shorter, the stripped part will not contact the connector.
-
Page 4: Specifications
AB-7245 Model Number Model number Description WY5610 Infilex BC control unit 100 V AC to 240 V AC power 0010 BACnet Building Controller (B-BC) Note: * Infilex BC control unit is always bundled with Infilex BC I/O control unit. When ordering Infilex BC (control unit and I/O control unit), order number is required. - Page 5 AB-7245 CE Marking Conformity This product must be installed in a panel cabinet. Besides, the product in the panel cabinet must be out of reach of unauthorized people who are not well-trained for electric facilities. This product complies with the following Electromagnetic Compatibility (EMC) and the Low Voltage Directive (LVD). EMC : EN61326-1 Class A, Table 2 (For use in an industrial electromagnetic environment) LVD : EN61010-1...
-
Page 6: Parts Identifications
AB-7245 Parts Identifications LED and 7-segment LED DIP switch for Data Setter line changeover Power supply terminals Data Setter connector Direct input terminals Power supply switch INT (initializing) switch RESET switch Expansion bus terminals Battery Not used Not used Not used Ethernet port DIP: Dual in-line package Figure 3. -
Page 7: Precautions For Installation
AB-7245 Installation Precautions for installation CAUTION Use the product under the operating conditions (temperature, humidity, power, vibration, shock, mounting direction, atmospheric condition, etc.) as listed in the specifications. Failure to do so might cause fire or device failure. ... -
Page 8: Installation Procedure
AB-7245 Installation procedure CAUTION After mounting the product on DIN rail, push up the DIN rail holder of the product to secure it on the DIN rail. If the product is not fixed with the DIN rail holder, it might drop from the DIN rail and get damaged. This product is mounted onto DIN rail. -
Page 9: Precautions For Wiring
AB-7245 Wiring Precautions for wiring WARNING Before wiring, be sure to turn off the power to the product. Failure to do so might cause electric shock. Be sure to ground the product with ground resistance of less than 100 Ω. ... - Page 10 AB-7245 Wiring to the expansion bus terminals Product front surface Expansion bus line is connected to the screwless push-in terminal block. Insert each wire with the clamp release button pressed. Clamp release button Connect all the wires to the screwless push-in terminal block first, and then plug the terminal block into the 10 mm connectors on the product front surface.
- Page 11 AB-7245 Wiring to the direct input terminals Product front surface Direct input wires are connected to a screwless push-in terminal block. Insert each wire with the clamp release button pressed. Clamp release button Connect all the wires to the screwless push-in terminal block first, and then plug the terminal block in the 10 mm Plug in.
- Page 12 AB-7245 Infilex and savic-net are trademarks of Azbil Corporation in Japan or in other countries. BACnet is a registered trademark of American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). CompactFlash is a trademark of SanDisk Corporation registered in the United States and other countries.
Need help?
Do you have a question about the Infilex BC WY5610W0010 and is the answer not in the manual?
Questions and answers