Speaker Volume; Handset Volume (Fax-2480C Only); Choosing The Handset Volume (For Volume Amplify) (Fax-2480C Only) - Brother FAX-2480C User Manual

Speaker Volume

You can choose a range of speaker volume
levels, from High to Off.
a
Press Menu, 1, 4, 3.
b
Press a or b to choose Low, Med,
High or Off.
Press OK.
c
Press Stop/Exit.
You can also adjust the speaker volume by
pressing Hook/Hold or Speaker Phone.
a
Press Hook/Hold or Speaker Phone.
b
Press d or c
This setting will stay until you change it
again.
c
Press Hook/Hold or Speaker Phone.
Handset Volume
(FAX-2480C only)
a
Press Menu, 1, 4, 4.
b
Press a or b to choose Low or High.
Press OK.
c
Press Stop/Exit.
You can also adjust the handset volume any
time you are talking on the telephone. There
are two handset volume levels, Low and
High. The default setting is Low.
Press d or c to adjust the volume level.
The LCD shows the setting you are choosing.
The new setting will remain until you change
it again.
3
.
3
Choosing the Handset
Volume (For Volume Amplify)
(FAX-2480C only)
Before you begin to use the machine, you
must decide if you need to set the handset
volume to Vol Amplify:On for a user who
is hearing-impaired. The AMPLIFY volume
level complies with FCC standards.
Vol Amplify:Off
This default setting is appropriate if none of
the users are hearing-impaired. During a
conversation, users can press
on the control panel to adjust the volume to
Low or High. When the handset is replaced,
the handset volume will remain until you
change it again.
Vol Amplify:On—Temporary
This setting is appropriate if some of the
users are hearing-impaired. During a
conversation, users can press
on the control panel to adjust the volume to
Low, High or Volume Amplify.
When the handset is replaced, the handset
volume returns to the default setting of Low.
Vol Amplify:On—Permanent
Choose Vol Amplify:On—Permanent if all
of the users are hearing-impaired. During a
conversation, users can press
on the control panel to adjust the volume to
Low, High or Volume Amplify. When the
handset is replaced, the handset volume
returns to the default setting of Volume
Amplify.
Note
When you press
control panel to adjust the volume, the
LCD shows the setting you are choosing.
Each key press changes the volume to the
next setting.
General setup
3
d or c
d or c
d or c
d or c on the
21
3