Preparing For Spraying - Micron Herbidome 350 Instruction Manual

The sprayer is delivered as 3 sub-assembled units;
(a) The HERBIDOME 350 sprayhead and handle unit.
(b) The Powerpack unit incorporating the switch.
(c) The backpack tank unit.
To Assemble the HERBIDOME 350 Sprayer
Fit the HERBIDOME 350 sprayhead and handle
unit to the Powerpack by first pushing the
electrical plug on the powerpack (1) into the
socket on the sprayhead and handle unit (2). Then
depress the white button (3) on the sprayhead and
handle unit whilst pushing it into the Powerpack
until the button locates in the hole provided (4).
Remove the switch end piece as follows; by
unscrewing the Screw Switch Plug
Insert four batteries (D-cell/R20), flat end
(negative) first, replace the switch end piece.

PREPARING FOR SPRAYING

6
(3)
(2)
(1)
(4)