Mixing, Filling And Calibration - Micron Herbidome 350 Instruction Manual

Mixing and filling is generally the most hazardous process in the spraying operation.
Always follow the label instructions. Always use a filter (fitted in the backpack tank
unit) and use a funnel if filling a container with a small neck. Only mix enough spray for
the area to be treated thereby avoiding the need for disposal of unused spray mix.
Always wear gloves when handling
agrochemicals and equipment.
Always wash off any skin
contamination
With the HERBIDOME 350 herbicides are normally applied at around 50 litres total
spray volume per hectare. These are lower volumes than recommended for high volume
application with knapsack sprayers. Use the minimum dose rate recommended on the
label for the intended treatment and add water to make up to the volume required for
application with the HERBIDOME 350.

MIXING, FILLING AND CALIBRATION

Always use the correct equipment
when mixing and measuring.
Always clean all equipment after use.
7