Preparing For Spraying - Micron ELECTRAFAN 12 Instruction Manual

PREPARING FOR SPRAYING

Before connecting to the battery, check by hand that the atomiser assembly and fan
rotate freely by turning the atomiser assembly in an anti-clockwise direction. (Do
not touch the edge of the atomiser disc). If they are not free to rotate do not attempt
to start the sprayer but contact your supplier or Service Department at Micron.
Plug the sprayer into the battery and switch on to check smooth running of the atom-
iser disc and fan.
The sprayer must only be used at the rated voltage. The machine must be switched
off in the event of power interruption.
N.B. Before spraying for the first time with the ELECTRAFAN 12, sprayer opera-
tion must be checked using only water (see 'BEFORE SPRAYING').
4