Warnings - JinkoSolar JKM M-72 Series Installation Manual

Photovoltaic module
Hide thumbs Also See for JKM M-72 Series:
Table of Contents

Advertisement

1.3 Warnings

 PV modules generate DC electrical energy when exposed to sunlight or other
light sources. Active parts of module such as terminals can result in burns, sparks,
and lethal shock.
 Artificially concentrated sunlight shall not be directed on the module or panel.
· Front protective glass is utilized on module. Broken solar module glass is an
electrical safety hazard (may cause electric shock and fire). These modules
cannot be repaired and should be replaced immediately.
Warning
 To reduce the risk of electrical shocks or burns, modules may be covered with an
opaque material during installation to avoid shocks or burns.
 The installation work of the PV array can only be done under the protection of
sun-sheltering covers or sunshades and only qualified person can install or
perform maintenance work on this module.
 Follow the battery manufacture„s recommendations if batteries are used with
module.
 Do not use this module to replace or partly replace roofs and walls of living
buildings.
 Do not install modules where flammable gas may be present.
 Do not touch live terminals with bare hands. Use insulated tools for electrical
connections.
Electric Shock and Burn Hazard
This photovoltaic module produces
Electricity when exposed to the sun
- 4 -

Advertisement

Table of Contents
loading

Table of Contents