Label Configuration Query; Manufacturing Date Query: Esc{Md - Oneil microFlash2 Programming Reference Manual

Label Configuration Query

Label Configuration Query
Query ESC{CL?}
Format
Reply {CL!T:n;D:n;M:n;S:n;P:n;U:n;B:n;W:n}
Format
Reply {CL!T:P;D:1;M:1;S:T;P:Y;U:3;B:2;W:N}
Example
Reply CL! - Reply to a label configuration query.
Explanation
T: Type of stock used -
P=Plain paper
T=Top QMark
B=Bottom QMark
D: Distance to advance after QMark is
sensed before stop - Distance given in
dotlines (.005 inches)
M: Maximum distance to advance if QMark
is not sensed - Distance given in dotlines
(.005 inches)
S: Sensor to use for paper out -
T=Top sensor
B=Bottom sensor
P: Presenter -
Y=Yes (use)
N=N (do not use)
U: Label under presenter timeout - Time in
seconds to not go to sleep if label is left
under the presenter sensor.
B: Backup distance - Distance given in
dotlines (.005 inches)
W: Windows driver QMark (automatically
advance to find QMark after print job from
Windows driver) -
Y=Yes (assume stock is QMarked)
N=No (assume stock is plain paper)

Manufacturing Date Query: ESC{MD?}

The manufacturing date of the printer is returned, if the manufacturing date has been written
to the printer, otherwise the data field returned is None. Since the manufacturing date is
actually the parameter returned, there is no need for the Parameter:Data after the MD! in
the response (MD!<date string>. The date is a string that can be entered in any format.
Typically, the format is MM/DD/YY.
Query: ESC{MD?}
Response (note that the date string can have different formats): {MD!12/10/2005}
Chapter 4: Querying the Printer
O'Neil Programming Language Reference Manual
Original Radio Ready
MF2/MF3/ 2t/3t/4t
2t/4t
X
X
X
LP3 only
LP3 only
LP3 only
X
X
64