Oneil microFlash2 Programming Reference Manual page 32

RF Radio Power Down Timeout {CR:nn}
{ A left bracket begins the command set.
CR:nn This command turns off the radio if there
is no activity in nnn minutes; it requires
the user to turn the radio back on via
button push before communications can
resume.
nnn in minutes
nnn = 65536: Never times out (default)
} A right bracket ends the command set.
System Timeout (Printer Sleep Timer) {CT:nn}
{ A left bracket begins the command set.
CT:nn nnn in seconds (default 10s to 60s)
nnn = 9999: Never times out.
Note: If there is no activity
(communications or button pushes)
within the specified time, the printer will
"go to sleep" to save power. A button
push or new communications will wake
up the printer.
} A right bracket ends the command set.
Configure Number of Data Bits {CN:n}
{
CN:n
}
Configure Parity {CP:n}
{
CP:n
}
Chapter 3: Using Easy Print Mode
A left bracket begins the command set.
Configures the number of data bits where n indicates seven or eight
data bits.
A right bracket ends the command set.
A left bracket begins the command set.
Configures the parity:
N = No parity
E = Even parity
O = Odd parity
A right bracket ends the command set.
O'Neil Programming Language Reference Manual
Original Radio Ready
MF2, MF3, 2t, 4t 2t, 3l, 4t
X
Original Radio Ready
MF2, MF3, 2t, 4t 2t, 3l, 4t
X
X
X
31