Easy Print Commands; Ahead Command; Back Command - Oneil microFlash2 Programming Reference Manual

Easy Print Commands

Easy Print commands have a unique format and function. All but the Query class of
commands are documented on the following pages. For information on queries, refer to
Querying the Printer in the O'Neil Thermal Programming Guide.
Note: In this chapter, an n indicates ASCII numbers, not binary numbers. For more
information, see the specific command listed in the table below.
The following table lists available Easy Print commands:
Command
Ahead
Back
LP
Self-Test Printout
Status
Initial Program Load
Print Commands
Configuration

Ahead Command

Ahead Command Format {AHEAD:nnn}
{ A left bracket begins the command set.
AHEAD:nnn AHEAD:nnn or Ahead:nnn or A:nnn advances the paper
by nnn dotlines. Use the Ahead command as an
alternative to manually advancing the paper. The range
for nnn is 1 to 65,000 dotlines.
} A right bracket ends the command set.

Back Command

Back Command Format {BACK:nnn}
{ A left bracket begins the command set.
BACK:nnn BACK:nnn or Back:nnn or B:nnn backs the paper by nnn
dotlines. Use the BACK command to reposition the edge of
the paper for minimum paper waste.
} A right bracket ends the command set.
Chapter 3: Using Easy Print Mode
O'Neil Programming Language Reference Manual
Page
18
18
18
18
18
19
20
27
18