Oneil microFlash2 Programming Reference Manual page 40

W:n - Use QMark stock with Windows
driver.
Note: If turned ON, the printer
automatically looks for the QMark at
end of Windows Driver (RLE) print job.
} A right bracket ends the command set.
Configure Magnetic CardReader {CMR:m}
{ A left bracket begins the command
set.
CMR:m D:m - Direction card is moving
when read.
P:m - Automatically prints data
when card is inserted
S:m - Automatically sends string of
data when card is inserted
T1:m - Enables or disables
magnetic card track 1.
T2:m - Enables or disables
magnetic card track 2.
T3:m - Enables or disables
magnetic card track 3.
} A right bracket ends the command
set.
Chapter 3: Using Easy Print Mode
Values/
Format
m = IN : read
on insert
m = OUT : on
withdrawal
m = BOTH : in
and with.
m = ON : print
enabled
m = OFF : print
disabled
m = ON : send
data
m = OFF : send
data
m = ON :
enable track 1
m = OFF :
disable track 1
m = ON :
enable track 2
m = OFF :
disable track 2
m = ON :
enable track 3
m = OFF :
disable track 3
O'Neil Programming Language Reference Manual
n = Y : On (Look
for QMark)
n = N : Off (Do
not look for
QMark)
Default is OFF
Original 2t, 4t
CR SCR
X
X
X
X
X
X
X
Radio
Ready
2t,4t
SCR
X X
X X
X X
X X
X X
39