Oneil microFlash2 Programming Reference Manual page 14

Note: Use the following Easy Print command to return to Line Printer
mode while in Easy Print mode. {LP} is not a Line Printer command.
If you mistakenly use {LP} while in Line Printer mode, {LP} prints on
your receipt or label.
Format: {LP}
ESC Hn Heighten Font n Times
Format ESC Hn
Dec 27 72
Hex 1B 48
Function Multiplies the height of the font by n. Must apply to the entire
line.
ESC Q n1n2 Advance n1n2 from Q mark
Format ESC Q n1n2
Dec 27 81
Hex 1B 51
Function Advances the paper n1n2 dotlines from the Q mark. For
information on the Q mark, refer to Specifications in the
O'Neil Thermal Programming Guide.
ESC R n Select International Character Set
Format ESC R n
Dec 27 82
Hex 1B 52
Function Select international character sets.
Note: The common IBM Code page 437 with 224 characters
must be used.
0=USA
1= France
2=Germany 6=Italy
3=UK
ESC !n Set Double Wide and Double High
Format ESC ! n
Dec 27 33
Hex 1B 21
Function Selects font height and width for one line. Must apply to
entire line.
n=10h 16d Double high
n=20h 32d Double wide
n=30h 48d Double high and double wide
Chapter 2: Using Line Printer Mode
n
n
n
n
n
n
4=Denmark
5=Sweden
7=Spain
n
n
O'Neil Programming Language Reference Manual
13