Oneil microFlash2 Programming Reference Manual page 38

Configure IrDA Baud Name {CIN:string}
{ A left bracket begins the command set.
CIN:string Overview: The CIN command requires data
only to configure the name given to the
printer when it connects to an IrDA host.
string: Can be a maximum of 19
characters.
} A right bracket ends the command set.
Configure IrDA Autovoid {CIV:n}
{ A left bracket begins the command set.
CIV:n Overview: The CIV command can be
used to turn autovoid on or off (default
is on). If an IrDA connection is made
and the printer times out before it
receives a disconnect from the host, it
assumes that all data has not been
transferred and will automatically print
VOID ** VOID ** VOID across the
printed page as a safeguard to assure
the proper document has printed
completely.
n is used to turn AutoVoid on or off:
n = Y : AutoVoid ON
n = N : AutoVoid OFF
} A right bracket ends the command set.
Chapter 3: Using Easy Print Mode
O'Neil Programming Language Reference Manual
Original
MF2, MF3, 2t, 4t
X
Original Radio Ready
MF2, MF3, 2t, 4t
X
Radio Ready
2t, 3l, 4t
2t, 3l, 4t
37