Three-Letter Configuration Commands - Oneil microFlash2 Programming Reference Manual

Configure Carriage Return {CC:n}
{
CC:n
}
Configure Beeper {CS:n} (version 5.21, 6.21, and later only)
{
CS:n
}

Three-Letter Configuration Commands

TCP/IP 802.llb and Bluetooth Wireless configurations. Versions 5.13 and 6.13 and later only:
Configure Default Values {CDV}
{
CDV
}
Restore Default Values {RDV}
{
RDV
}
Stores Default Values {SDV}
{
SDV
}
Chapter 3: Using Easy Print Mode
A left bracket begins the command set.
Configures the carriage return to automatically add LF (line feed) to
CR (carriage return) as follows:
CR - CR
Y - CR=CRLF (For PK printers only)
A right bracket ends the command set.
A left bracket begins the command set.
Configures the beeper on or off:
Y = Beeper on
N = Beeper off
A right bracket ends the command set.
A left bracket begins the command set.
Reverts to non user-specific default values at time of manufacture for
configuration parameters.
A right bracket ends the command set.
A left bracket begins the command set.
Restores all configuration parameters to those stored by the SDV
command.
A right bracket ends the command set.
A left bracket begins the command set.
Stores an image of the current parameter values in separate area of
Flash. See RDV to restore the parameters to those values stored by
SDV.
A right bracket ends the command set.
O'Neil Programming Language Reference Manual
32