Oneil microFlash2 Programming Reference Manual page 29

Configure Baud Rate {CB:nn}
{ A left bracket begins the command set.
CB:nn Configures the baud rate. Use the
following values to specify the baud rate:
nn=00: 1200 BAUD
nn=01: 2400 BAUD
nn=02: 4800 BAUD
nn=03: 9600 BAUD (default)
nn=04: 19.2K BAUD
nn=05: 38.4 BAUD
nn=06: 57.6 BAUD
nn=07: 115.2K BAUD
} A right bracket ends the command set.
Configure Print Darkness {CD:nn}
{ A left bracket begins the command set.
CD:nn Configures print darkness (aka burn
adjust). The value of nn is normal plain
paper.
nn=-25: -25% (for very sensitive stock)
nn=-20: -20%
nn=-15: -15%
nn =-10:-10%
nn =-05:-5%
nn = 00: 00 (default - for "regular" stock)
nn = 05:+5%
nn = 10: +10%
nn = 15:+15%
nn = 20: +20%
nn = 25: +25%
nn = 30: +30%
nn = 35: +35% (for high temp stock)
} A right bracket ends the command set.
Configure Battery Eliminator {CE:n}
{ A left bracket begins the command set.
CE:n n = y or Y: Battery eliminator is present.
n = n or N: None (default)
Note: The battery eliminator can be used
to power the printer from a wall charger.
} A right bracket ends the command set.
Chapter 3: Using Easy Print Mode
O'Neil Programming Language Reference Manual
Original Radio Ready
MF2, MF3, 2t, 4t
X (MF2/MF3)
X
X (MF2/MF3)
X
X (MF2/MF3)
X
Original Radio Ready
MF2, MF3, 2t, 4t
X
Original Radio Ready
MF2, MF3, 2t, 4t 2t, 3l, 4t
X
(4t printers only) (4t printers only)
2t, 3l, 4t
X
X
X
X
X
X
X
X
2t, 3l, 4t
X
X
28