Car Solutions PCM5.0 Installation Manual page 6

Menu of FACTORY
IMAGE H-POSITION
PARK V-POSITION
UTIL1
UTIL2
INFO
MENU to Return SEL to Select/Save
Menu of FACTORY
IMAGE
PAS TYPE
PARK
PAS SETUP
UTIL1
REAR TYPE
UTIL2
RADAR ENABLE
INFO
MENU to Return SEL to Select/Save
PARK
PAS TYPE: Select parking line type
NOT USED: Do not use parking line
PAS ON: Use Flexible Parking Lines
PAS OFF: Use fixed parking line
PAS SETUP:
You can move the position of parking line.
REAR TYPE: Choose rear camera recognition.
CAN: Detecting the rear view camera by CAN signal. (Installer must connect
"CAN" cable of the power cable to the "CAN" cable of the car)
LAMP: Detecting the rear view camera via "Grey Rear" wire. (Installer must
connect "Rear-C" cable of the power cable to the rear lamp of the car)
RADAR ENABLE:
Setting up parking distance alarm sensor (ON/OFF)
IMAGE
H-POSITION/V-POSITION Setting
6