Recording Message Center Outgoing Message; Listening To Outgoing Message (Ogm) - Brother FAX 1920CN User Manual

Recording Message Center Outgoing Message

Recording the Message Center Outgoing Message (Msg Ctr OGM)
is the first step you need to follow before you can turn on the
Message Center. Make sure your OGM is less than 20 seconds long.
1
Menu/Set
Press
The LCD prompts you to choose an
OGM.
2
Press
Ctr OGM (not F/T OGM ).
Menu/Set
Press
This is the only setting you can select if you want to turn on
the Message Center.
3
Press
Menu/Set
Press
4
Pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time.
Please leave a message after the signal. If you wish to send a
fax, please press
button.
5
Replace the handset.
The Message Center will play your OGM.
6
Stop/Exit
Press

Listening to Outgoing Message (OGM)

1
Menu/Set
Press
2
Press
Ctr OGM (or F/T OGM ).
Menu/Set
Press
3
Press
Menu/Set
Press
Adjust the volume by pressing Volume
4
Stop/Exit
Press
9 - 2 MESSAGE CENTER (FAX-1920CN ONLY)
2 7 1
, , , .
or to select Msg
.
or to select Record OGM .
.
5 1
, wait for fax tones, then press the Start
.
2 7 1
, , , .
or to select Msg
.
or to select Play OGM .
.
.
1.OGM
Msg. Ctr OGM
1.OGM
or .