Setting Up Groups For Broadcasting - Brother FAX 1920CN User Manual

Setting up Groups for Broadcasting

Groups, which can be stored on a One-Touch key or a Speed-Dial
location, allow you to send the same fax message to many fax
numbers by pressing only a One-Touch key and
Search/Speed Dial
First, you'll need to store each fax number as a One-Touch or
Speed-Dial number. Then, you can combine them into a Group,
Each Group uses up a One-Touch key or a Speed-Dial location.
Finally, you can have up to six small Groups, or you can assign up to
103 numbers (FAX-1920CN) or up to 107 numbers (MFC-3320CN)
to one large Group.
(See Storing Speed-Dial numbers on page 7-3 and Changing
One-Touch and Speed-Dial numbers on page 7-4.)
1
Menu/Set
Press
2
Decide where you wish to store the
Group.
—AND—
Press a One-Touch key.
—OR—
Search/Speed Dial
Press
and then press
3
Use the dial pad to enter the Group
number.
Menu/Set
Press
(For example, press
#
, , the two-digit location and
2 3 3
, , , .
and enter the two-digit location,
Menu/Set
.
.
1
for Group 1.)
QUICK-DIAL NUMBERS AND DIALING OPTIONS 7 - 5
Start
or
Start
.
3.Setup Groups
Setup Group:G0