Operating The Application; Setting The User-Defined Time Of Day Via Sms - Siemens LOGO! 8 Manual

6 Operating the Application

6.1 Setting the user-defined time of day via SMS

No.
4. Click on "Yes" to set the LOGO! to STOP before the download.
5. After the successful completion of the download click "Yes" in order to set the LOGO! back to
RUN.
6 Operating the Application
6.1 Setting the user-defined time of day via SMS
Table 6-1
No.
1. In the menu of your mobile phone you navigate to the point for sending SMS messages.
2. Enter the following text as SMS message, to set the time 22:00 h as user-defined time of day
for switching on the street lights on the following day:
"SMSwrite;LOGO=VM6,2200,WORD".
Note:
The command for writing a value to LOGO! 8 follows a defined structure
<Password>;LOGO=VM<address>,value>,<data_type>.
In the SMS command at the top, the following values were entered according to this
structure:
password "SMSwrite" assigned in the web interface (WBM) of LOGO! CMR at "WAN >
SMS" (
3. Enter the mobile phone number of the SIM card plugged into LOGO! CMR as the receiver in
the SMS message.
4. The user-defined time of day for switching on the street lights on the following day has now
been set to 22:00 h.
LOGO! Set 1
Entry ID: 109063024, V1.0,
Action
Table 4-1
, Step 5).
variable address "6" of function block "Mathematic instruction" in the
LOGO! program, in which the time of day is entered.
value "2200" for the time of day "22:00 h"
07/2015
Action
23