Table of Contents
Advertisement
Mainboard User's Manual
Install the device(s) and connect power from the system power
supply. Use the cable provided to connect the device(s) to the
Primary IDE channel connector IDE1 on the mainboard.
If you want to install more IDE devices, you can purchase a second
IDE cable and connect one or two devices to the Secondary IDE
channel connector IDE2 on the mainboard. If you have two
devices on the cable, one must be Master and one must be Slave.
Internal Sound Connections
If you have installed a CD-ROM drive or DVD-ROM drive, you
can connect the drive audio cable to the onboard sound system.
CD2
1
1
CD1
IR1
1
On the mainboard, locate the two 4-pin connectors CD1 and CD2.
There are two kinds of connectors because different brands of CD -
ROM drives have different kinds of audio cable connectors.
Connect the cable to the appropriate connector.
CD1
Pin
Signal
1
CD IN L
2
GND
3
GND
4
CD IN R
CD2
Pin
Signal
1
GND
2
CD IN R
3
GND
4
CD IN L
18
Advertisement
Table of Contents
